A powerflush is a cleansing process which aims to remove deposits of sludge, rust and any other debris from your central heating system. These contaminants, if left, can seriously affect the efficiency of a heating system and, in severe cases, a powerflush could be the only option available.
Over time the water in your pipes, boiler and radiators deposits unwanted byproducts like rust. This rust (plus other dirt and debris) becomes an unpleasant, mud-like substance that professionals affectionately refer to as ‘sludge’.
Sludge in your heating system can cause to blockages and corrosion which will lead to both inefficiency and / or breakdown. In extreme cases it can be so damaging that a complete boiler replacement is needed.
If you carry out regular servicing and maintenance (professional servicing is recommended annually) then a preventative powerflush should only be necessary every 5-6 years to clear debris and prevent significant blockages from taking hold.
However, this will vary depending on the system you have. For example, some boilers use copper heat exchangers, rather than stainless steel, which will corrode quicker.
IMPORTANT: If you are planning to replace your boiler it’s important that the engineer performs a powerflush before the installation. Otherwise, you risk contaminating the new boiler with damaging sludge and debris that’s hanging around in the old pipework.
There are signs to look out for that suggest that all is not well in your central heating system;
It’s not all doom and gloom; there are lots of positive reasons to get a powerflush carried out too.
A Goodey Services engineer will connect a pump to your central heating system. If it’s a Combi it will be connected at the pump head but if it’s a system boiler it will be connected at the circulation pump. This pump will push special chemicals through the pipes, boiler and radiators.
This includes a chemical that will remove sludge and rust, a descaler to remove limescale and corrosion inhibitor to help prevent future rust from forming. The engineer will collect and dispose of any contaminated water, debris or particles that they remove from the system.
The engineer may also use special tools on the exterior of the radiator to dislodge stubborn blockages. They should be able to measure the temperature of your radiators before they have started work and then show you the improvement after the powerflush.
The whole process can last anything from 6 – 10 hours depending on the number of radiators in your home, the age of the system and the severity of the sludge in the system. The engineer may find more problems than originally anticipated such as needing new parts to replace those that have been damaged beyond repair. Most powerflush jobs can be completed in one day but some of the more severe cases may require longer.
A qualified engineer will be able to perform repairs, replacements and carry out a powerflush.
There are lots of factors that will affect the price of a powerflush such as size and complexity of the heating system, not to mention any incidental troubleshooting that crops up. A powerflush can cost anything between £300 to £1000+ Sometimes there will be additional costs like extra descaler chemicals or replacing the TRVs.
It is important that your central heating system is as efficient as it can be at all times and, although a powerflush can be an expensive process, it can also save a lot of money over time in reduced heating bills.
In some particularly severe cases you may find it is actually more cost effective to replace the system than carry out a powerflush. A powerflush will not fix broken parts. If a blockage has caused a part to break that will add time and cost to the job to get the system back to optimum performance. Goodey Services will be able to advise you if this is the case.